The Barter Thread

John from MD · Dec 21, 2020

Sorry, my Winchesters are magnum. I do have a brick of Sellor and Bellot in Large Rifle.

ACMAN · Dec 21, 2020

John from MD said:
Sorry, my Winchesters are magnum. I do have a brick of Sellor and Bellot in Large Rifle.

John,
I have a trade pending with Scrounger on the LRP
Thanks for the offer
Do you have any Fed GM210M you are willing to trade?

Squaregrouper · Dec 21, 2020

I have 1300 LPP to trade for 1000 SPP or SRP

John from MD · Dec 21, 2020

ACMAN said:
John,
I have a trade pending with Scrounger on the LRP
Thanks for the offer
Do you have any Fed GM210M you are willing to trade?

I sent you a PM.

John

CrabbyMcNab · Dec 22, 2020

Looking for 200-300 of CCI 450 and Federal 205 to try loading for my Grendel. Also looking for a pound of CFE223 or IMR8208.

I have Federal GM210M or CCI 500, if 1:1 trade is reasonable. I’ll see what powders I have.

Also have a sandwich bag of 9mm range brass. Probably 200, have to count?

John from MD · Dec 22, 2020

CrabbyMcNab said:
Looking for 200-300 of CCI 450 and Federal 205 to try loading for my Grendel. Also looking for a pound of CFE223 or IMR8208.

I have Federal GM210M or CCI 500, if 1:1 trade is reasonable. I’ll see what powders I have.

Also have a sandwich bag of 9mm range brass. Probably 200, have to count?

Check out post #351. There is a fellow member looking for GM210M primers.

https://www.mdshooters.com/showthread.php?t=244579&page=37

KRC · Dec 22, 2020

Crabby - if you are still looking

I can spare 200 CCI 450's and a 100 Fed GM205M's (Match), with ~3/4 of a pound of CFE223 (I can measure it to the gram) if you have H4895 and/or Varget.

ACMAN · Dec 22, 2020

CrabbyMcNab said:
Looking for 200-300 of CCI 450 and Federal 205 to try loading for my Grendel. Also looking for a pound of CFE223 or IMR8208.

I have Federal GM210M or CCI 500, if 1:1 trade is reasonable. I’ll see what powders I have.

Also have a sandwich bag of 9mm range brass. Probably 200, have to count?

I'm looking for some GM210M.
I think I may have what your looking for.
I'll check when I get home.

ACMAN · Dec 22, 2020

CrabbyMcNab said:
Looking for 200-300 of CCI 450 and Federal 205 to try loading for my Grendel. Also looking for a pound of CFE223 or IMR8208.

I have Federal GM210M or CCI 500, if 1:1 trade is reasonable. I’ll see what powders I have.

Also have a sandwich bag of 9mm range brass. Probably 200, have to count?

Sent you an PM

deerassassin22 · Dec 22, 2020

I have Ramshot Tac

Looking to trade for federal small rifle primers or 6.5CM Lapua Brass, or Lapua 123grn Scenars 6.5mm

Located in Pasadena md and travel up to galena area on the weekends for the range and will meet within an hour.

Scrounger · Dec 22, 2020

ACMAN said:
I'm looking to trade 1000 Federal #205 SRP for 1000 of either Federal #210 LRP or Winchester WLR primers.

Trade pending with Scrounger

It was a pleasure meeting you today. Glad I was able to help you out.

ACMAN · Dec 22, 2020

Scrounger said:
It was a pleasure meeting you today. Glad I was able to help you out.

Nice to meet you too. I appreciate the help. Thank you

Speedluvn · Dec 22, 2020

I have a brick of CCI 550 small pistol magnum primers

I also have a brick of CCI 300, large pistol primers.

I’m looking to barter the above for small pistol primers.

CrabbyMcNab · Dec 23, 2020

KRC said:
Crabby - if you are still looking

I can spare 200 CCI 450's and a 100 Fed GM205M's (Match), with ~3/4 of a pound of CFE223 (I can measure it to the gram) if you have H4895 and/or Varget.

KRC, I don’t have those powders but do have an unopened bottle of Hodgdon Clays.

dbledoc · Dec 24, 2020

Looking for a Lee 4-hole classic turret plate.
They are out of stock everywhere except for a couple of outlandish priced places on Amazon.

Also for those looking i have 1 lb Varget available to trade.

fidelity · Dec 24, 2020

dbledoc said:
Looking for a Lee 4-hole classic turret plate.

They are out of stock everywhere except for a couple of outlandish priced places on Amazon.

Also for those looking i have 1 lb Varget available to trade.

Backordering at MidwayUSA worked for me. Maybe 3 weeks after I placed the order, I got the notification that they had it and I could add other items to the cart (which I did to get it above their $49 threshold for free shipping). Arriving late next week via UPS.

https://www.midwayusa.com/product/1013008294

floatingboy · Dec 27, 2020

Getting some Accurate 2520. Willing to trade a pound of it for some large rifle primers. Or for a pound of IMR 4064. Will have a few extra pounds for sale too.

kstone803 · Dec 27, 2020

I need some M Lok rail sections (3 or 5 slot). Have all types of reloading stuff to trade.

JimB · Dec 29, 2020

I have 1000 Federal Small Pistol Primers NO. 100 That I would like to trade for 1000 Small Rifle Primers. Frederick county area

JimB · Dec 29, 2020

/Users/christinebrown/Desktop/IMG_0417.jpeg
/Users/christinebrown/Desktop/IMG_0418.jpeg

The Barter Thread

The #1 community for Gun Owners of the Northeast

Member Benefits:

American Patriot

Active Member

Kragaphile

American Patriot

Ultimate Member

American Patriot

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Ultimate Member

Ultimate Member

piled higher and deeper

Active Member

Official Meat Getter

Active Member

Active Member

Users who are viewing this thread

Log in

Forum statistics