any great deals on 80 percent lowers

FlatsFlite · Dec 10, 2014

The best I can find is 7075 for $55. If you know of something better please share. Looking at a couple different winter projects.

Thanks

GTOGUNNER · Dec 10, 2014

PM sent

Alphabrew · Dec 10, 2014

Where you finding them for $55? I'm building one now, it's a fun project. But, I'll probably never make another. It's way easier and cheaper to just buy a lower.

Irish64 · Dec 10, 2014

Alphabrew said:
Where you finding them for $55? I'm building one now, it's a fun project. But, I'll probably never make another. It's way easier and cheaper to just buy a lower.

I would also like to know, seriously!

stu929 · Dec 10, 2014

I got blem complete lowers for 39 shipped. I get the point of an 80 but not sure i have the time much less the machinery to finish... :-(

GTOGUNNER · Dec 10, 2014

Most 80% Lower receivers start as 7075-T6 forgings and are fully machined to mil-spec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole.

Depending on the manufacture, you may get a receiver that needs more work than is listed above. Some of the differences are substantial.
In order not to waste money, be sure of what needs completed.

Tomcat · Dec 10, 2014

http://www.sportsmansguide.com/product/index/ar-15-lower-receiver-by-stealth-arms-80-forged-ar-15-kit?a=1681932

http://www.sportsmansguide.com/product/index/80-1911-lower-receiver?a=1747831

http://www.sportsmansguide.com/product/index/80-ar-15-lower-receiver?a=1564504

http://www.sportsmansguide.com/product/index/anderson-ar-15-parts-kit-with-80-lower-receiver?a=1747830

Alphabrew · Dec 10, 2014

hitwtom said:
http://www.sportsmansguide.com/product/index/ar-15-lower-receiver-by-stealth-arms-80-forged-ar-15-kit?a=1681932

http://www.sportsmansguide.com/product/index/80-1911-lower-receiver?a=1747831

http://www.sportsmansguide.com/product/index/80-ar-15-lower-receiver?a=1564504

http://www.sportsmansguide.com/product/index/anderson-ar-15-parts-kit-with-80-lower-receiver?a=1747830

NO NO NO!!!!!

Stay away from those drill press ones. I wasted $130 on that, it's a piece of shit. Do it with a mill or don't do it.

FlatsFlite · Dec 10, 2014

GTOGUNNER said:
PM sent

PM returned. Computer time is a little limited, but I'll get back to you sometime tomorrow.

DaemonAssassin · Dec 10, 2014

I'm looking for some 80's too. So tagging for later.

bigdummy30 · Dec 10, 2014

Alphabrew said:
NO NO NO!!!!!

Stay away from those drill press ones. I wasted $130 on that, it's a piece of shit. Do it with a mill or don't do it.

i did one of those exact kits in a drill press using end mills and a sliding vise and it came out wonderful. It's nice telling people I made it myself and their mind being blown.

jcbvh · Dec 13, 2014

Keep and eye on Ares and Tactical machining. I saw them as low as $43, and you can get a 100% stripped upper for $29

any great deals on 80 percent lowers

The #1 community for Gun Owners of the Northeast

Member Benefits:

FlatsFlite

Active Member

GTOGUNNER

IANAL, PATRIOT PICKET!!

Alphabrew

Binary male Lesbian

Irish64

Active Member

stu929

M1 Addict

GTOGUNNER

IANAL, PATRIOT PICKET!!

Tomcat

Formerly Known As HITWTOM

Alphabrew

Binary male Lesbian

FlatsFlite

Active Member

DaemonAssassin

Why should we Free BSD?

bigdummy30

Active Member

jcbvh

Active Member

Users who are viewing this thread

Latest posts

Forum statistics

Latest threads

Forum statistics

Share this page