I built this rifle during the summer, and never even fired it. So essentially it is brand spanking new. I am curious what it will fetch in todays market?
UPPER RECEIVER
-Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hard coat Anodized finish, T-markings, Spike’s -logo and M4 feed ramps.
-Barrel is certified MIL-B-11595E CMV. Bolt & barrel are HPT/MPI tested, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Phosphate finish.
-Lightweight (Pencil) Profile with Mid-length gas system.
-Barrel is Phosphate finished under the .625 F marked A2 front sight base.
-The M16 carriers are Chrome lined with a Mil-Spec phosphate finish.
-Forged Mil-Spec carrier key, Chrome lined, attached with Grade 8 hardware and Properly staked.
-HP/MP Tested Bolt, Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring.
-Magpul MOE heat shield lined black handguards.
-Magpul Angled Fore Grip 2 (AFG2)
-Pinned Spike's Tactical DynaComp Muzzle Break.
-Colt A3 detachable carry handle.
LOWER RECEIVER
-Standard Spikes lower
-ST Spider Logo
-Bullet Pictogram Selector Markings
-Low Shelf, RDIAS Compatible
-ST Standard LPK
-6-Position Buffer Tube, Castle Nut, Staked Latch Plate
-17-7 Stainless Buffer Spring
-ST-T2 Buffer
-M4 Stock Included
-Magpul MIAD (MIssion ADaptable) Grip
-Magpul B.A.D. LEVER Battery Assist Device
UPPER RECEIVER
-Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hard coat Anodized finish, T-markings, Spike’s -logo and M4 feed ramps.
-Barrel is certified MIL-B-11595E CMV. Bolt & barrel are HPT/MPI tested, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Phosphate finish.
-Lightweight (Pencil) Profile with Mid-length gas system.
-Barrel is Phosphate finished under the .625 F marked A2 front sight base.
-The M16 carriers are Chrome lined with a Mil-Spec phosphate finish.
-Forged Mil-Spec carrier key, Chrome lined, attached with Grade 8 hardware and Properly staked.
-HP/MP Tested Bolt, Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring.
-Magpul MOE heat shield lined black handguards.
-Magpul Angled Fore Grip 2 (AFG2)
-Pinned Spike's Tactical DynaComp Muzzle Break.
-Colt A3 detachable carry handle.
LOWER RECEIVER
-Standard Spikes lower
-ST Spider Logo
-Bullet Pictogram Selector Markings
-Low Shelf, RDIAS Compatible
-ST Standard LPK
-6-Position Buffer Tube, Castle Nut, Staked Latch Plate
-17-7 Stainless Buffer Spring
-ST-T2 Buffer
-M4 Stock Included
-Magpul MIAD (MIssion ADaptable) Grip
-Magpul B.A.D. LEVER Battery Assist Device