Squaregrouper
Kragaphile
Today I took my first suppressor build to AGC and couldn't hit paper at 25yds. I only fired 20 rounds suppressed until I realized something was wrong. After removing the can (oven mitt) I allowed it to cool and noticed that the end cap had been hit by a bullet(s). Once home, I took it apart and all of the FP baffles were in perfect condition. I don't know why the end cap would have been hit but not the baffles.
Stuff:
SD Tactical 9.6" titanium tube, Aluminum end cap and thread adapter. 45* freeze plugs and stainless blast chamber and spacers
PSA SBR 5.56mm with a 10.5" barrel with 1/7 twist
Perfecta .223 factory ammo
SBR w/suppressor mounted visually had a clear path and I confirmed with an acrylic rod.
Any idea what may have gone wrong?
Kyle/Squaregrouper
PS- The decibel reduction was impressive and I got to meet Melnic
Stuff:
SD Tactical 9.6" titanium tube, Aluminum end cap and thread adapter. 45* freeze plugs and stainless blast chamber and spacers
PSA SBR 5.56mm with a 10.5" barrel with 1/7 twist
Perfecta .223 factory ammo
SBR w/suppressor mounted visually had a clear path and I confirmed with an acrylic rod.
Any idea what may have gone wrong?
Kyle/Squaregrouper
PS- The decibel reduction was impressive and I got to meet Melnic