It's on the way
Neat... but that picture doesn't give me confidence that we'll see anything for sale in the next 6 months.
It's on the way
It's in a recess... Swenson slide.How did you mount that Burris red dot on the top gun? It looks like it's sitting directly on the slide and not in a machined recess.
It's in a recess... Swenson slide.
Sent from my ZTE A2017U using Tapatalk
My latest creation... PF940SC with Storm Lake extended G26 barrel, Primary Machine comp, and Crimson Trace CMR-205 light/laser. I'll add an RMR or HS507C when funds become available. Frame and slide are all Glock parts otherwise (dot connector). No idea how it runs, just got it finished tonight.
I will say that the recoil spring guide rod channel on these frames is TIGHT due to the diameter of the rod. You really have to mill it all the way to where the locking block is... it took me a couple tries.
I also noticed that the "pull trigger too hard and connector moves out of the way" problem seems to be fixed on these frames! In theory, you should be safer using LWD parts on these frames.
I was hoping I’d find one of these in here. I want to build a 26L out of one in the worst way. I have a 19 right now and my plan is to use that slide on the P80 frame and then get a 17 or 34 slide for my 19 frame. I perform better with a compact/subcompact grip instead of a full size. Baby hands I guess
Or you can just get the slide adapter from Lone Wolf and barrel to achieve the same result. For less than a new frame, frame parts kit, etc.
If your sticking with a 9mm or 40, the barrels are a lot more available than what I had to choose from when I had the 31 slide on a 32 frame.
Poly80 is also coming out with a hybrid frame. 17 side with 19 grip. PF940CL
Very nice! I think I need a new G19 size project.
Thinking of getting a readymod p940sc. Any good places for stippling?
So, I ran my PF940C at a class on Sunday night, sans comp. Ran really well, no malfunctions, but the top locking block pin walked out of the frame a bit. No functional issue, and I stuffed it back in with my finger. I'll probably just put some clear finger nail polish on it to pseudo lock it in place next time I strip the gun down for detailed maintenance. This is apparently an issue with real Glocks, too, so I'm not very concerned about it.
I wish someone would make a slightly-extended Glock mag release. The factory Glock extended release is way too long for these guns, but I wish I had just a touch more length for more leverage than the non-extended one. Goldilocks and all that.
Tango down Vickers is what I have.
I'd like to see a picture when convenient.Same, they are just slightly extended with a curve edge. I’ll probably have one of mine pulled apart tonight that I could get a photo of the difference if you would like.