Because the Master Po website is flaky and we don't want to lose this info, I'm posting it here for posterity. This info was copied from the master po website that is showing a tracking virus from my web software.
*************************
Recommended .30 caliber M1 loadings from the NRA
147 - 155 grain FMJ or HPBT bullets
IMR 3031 - 48.0 grains
IMR 4895 - 49.0 grains
IMR 4064 - 50.0 grains
W748 - 48.0 grains
AA2460 - 49.0 grains
AA2520 - 51.0 grains
AA2495 - 50.5 grains
H4895 - 49.0 grains
BLC-2 - 49.0 grains
H335 - 49.0 grains
RL-12 - 48.0 grains
165/168 grain FMJ, HP or SP bullets
IMR 4895 - 47.0 grains
IMR 4094 - 48.0 grains
AA2520 - 47.5 grains
AA2495 - 47.0 grains
H4895 - 47.5 grains
BLC-2 - 49.0 grains
H335 - 47.0 grains
RL-12 - 44.5 grains
173/175 grain FMJ or HPBT bullets
IMR 4895 - 46.0 grains
IMR 4064 - 47.0 grains
AA2460 - 46.0 grains
AA2495 - 46.0 grains
H4895 - 47.0 grains
BLC-2 - 48.0 grains
180 grain FMJ, SP or HPBT bullets
IMR 4895 - 43.0 grains
AA2460 - 46.5 grains
AA2495 - 45.5 grains
H4895 - 44.0 grains
BLC-2 - 47.5 grains
RL-12 - 41.5 grains
Master Po's comments
These loads only duplicate military spec. velocities for the given bullet weight, using commercial cases and powders. If you are using military cases, drop all charges by 2 grains.
If you are looking for accuracy, drop all charges by 1 grain and work up .2 grains at a time.
Master Po's Ancient M1 load secret
This is my personal M1 load I use in my CMP M1. It will shoot better than Master Po can. I worked this load up, as you should for your own rifle.
Remington .30/06 cases, flash holes deburred and weighed within 1 grain.
Federal GM210M Primers (Master Po has heard the horror stories of Federal match primers in the M1/M1A rifles. If you're squeamish or new to reloading, use Winchester Large Rifle)
47.0 grains IMR 4064
Sierra 175 grain MatchKing
Overall length 3.340 inches
This load, in my M1, duplicates almost perfectly the M72 match load specification with a very low standard deviation. Groups off the bench run 1 - 1.5 inches with the original 1945 barrel on the rifle. Of course, Grasshopper YMMV.
*************************
Recommended .30 caliber M1 loadings from the NRA
147 - 155 grain FMJ or HPBT bullets
IMR 3031 - 48.0 grains
IMR 4895 - 49.0 grains
IMR 4064 - 50.0 grains
W748 - 48.0 grains
AA2460 - 49.0 grains
AA2520 - 51.0 grains
AA2495 - 50.5 grains
H4895 - 49.0 grains
BLC-2 - 49.0 grains
H335 - 49.0 grains
RL-12 - 48.0 grains
165/168 grain FMJ, HP or SP bullets
IMR 4895 - 47.0 grains
IMR 4094 - 48.0 grains
AA2520 - 47.5 grains
AA2495 - 47.0 grains
H4895 - 47.5 grains
BLC-2 - 49.0 grains
H335 - 47.0 grains
RL-12 - 44.5 grains
173/175 grain FMJ or HPBT bullets
IMR 4895 - 46.0 grains
IMR 4064 - 47.0 grains
AA2460 - 46.0 grains
AA2495 - 46.0 grains
H4895 - 47.0 grains
BLC-2 - 48.0 grains
180 grain FMJ, SP or HPBT bullets
IMR 4895 - 43.0 grains
AA2460 - 46.5 grains
AA2495 - 45.5 grains
H4895 - 44.0 grains
BLC-2 - 47.5 grains
RL-12 - 41.5 grains
Master Po's comments
These loads only duplicate military spec. velocities for the given bullet weight, using commercial cases and powders. If you are using military cases, drop all charges by 2 grains.
If you are looking for accuracy, drop all charges by 1 grain and work up .2 grains at a time.
Master Po's Ancient M1 load secret
This is my personal M1 load I use in my CMP M1. It will shoot better than Master Po can. I worked this load up, as you should for your own rifle.
Remington .30/06 cases, flash holes deburred and weighed within 1 grain.
Federal GM210M Primers (Master Po has heard the horror stories of Federal match primers in the M1/M1A rifles. If you're squeamish or new to reloading, use Winchester Large Rifle)
47.0 grains IMR 4064
Sierra 175 grain MatchKing
Overall length 3.340 inches
This load, in my M1, duplicates almost perfectly the M72 match load specification with a very low standard deviation. Groups off the bench run 1 - 1.5 inches with the original 1945 barrel on the rifle. Of course, Grasshopper YMMV.