The Barter Thread

bigmancrisler · Mar 25, 2021

I’ve got a bunch of processed 9mm brass (can have matching head stamps) and 223/556 brass (processed and unprocessed)

looking for 8x56r mannlicher brass, 6.5x52 carcano dies, and the usual primers LRP,SRP,SPP.

Sent from my iPhone using Tapatalk

platekiller · Mar 28, 2021

Good trade with 4g64loser. Pleasure to meet you sir

Sent from my iPhone using Tapatalk

JBoone · Mar 28, 2021

I have a 30-06 FL RCBS die set that I would like to trade for some small pistol or rifle primers. These are practically new and worth about $40. Thanks

JimB · Mar 28, 2021

How many primers for the dies

JBoone · Mar 28, 2021

JimB said:
How many primers for the dies

I would take 500 of either small primers.

C.Alls · Mar 28, 2021

I have 1k LRP (CCI 200), some SRP (CCI), .308 gas checks, Federal 22LR (38 GRAIN), Tippmann 22LR (1050) AND (1250) and some 6.5 Grendel ammo (Hornady Custom 123 SST).

I'm looking for some CCI standard velocity (1070fps) 22LR. I'd also like some CCI segmented hp (1050fps). Could also use some 9mm brass.

dbledoc · Mar 28, 2021

C.Alls said:
I have 1k LRP (CCI 200), some SRP (CCI), .308 gas checks, Federal 22LR (38 GRAIN), Tippmann 22LR (1050) AND (1250) and some 6.5 Grendel ammo (Hornady Custom 123 SST).

I'm looking for some CCI standard velocity (1070fps) 22LR. I'd also like some CCI segmented hp (1050fps). Could also use some 9mm brass.

Where are you located. PM sent

4g64loser · Mar 28, 2021

dbledoc said:
Where are you located. PM sent

C.alls is in Oakland and is a great guy to deal with.

On that subject, met up with platekiller this morning. Solid guy to deal with and my apologies for talking in the rain, sir.

govwontletmebuycoolguns · Mar 28, 2021

I have about 2/3 of a 5 gallon bucket of mixed, unprocessed brass. 223/5.56, 9mm, 45acp, 308, 30-06.

I'd say 98% is once-fired (by me). Few randoms in there....happens when you don't have a catcher.

I was saving them up over the years with the intention of reloading, but never bought the gear and really don't see myself doing it at this point, so just looking to free up some space.

Free to good home, provided you can pickup in Conowingo.

Edit - Gone

downrange48 · Mar 28, 2021

govwontletmebuycoolguns said:
I have about 2/3 of a 5 gallon bucket of mixed, unprocessed brass. 223/5.56, 9mm, 45acp, 308, 30-06.

I'd say 98% is once-fired (by me). Few randoms in there....happens when you don't have a catcher.

I was saving them up over the years with the intention of reloading, but never bought the gear and really don't see myself doing it at this point, so just looking to free up some space.

Free to good home, provided you can pickup in Conowingo.

Interested in the brass live in Baltimore county.

downrange48 · Mar 28, 2021

dbledoc said:
I have:
200 .224 Hornady 75 he BTHP
200 .277 Hornady 130 he SP interlock
50 .308 Nosler Partition 200 gr Spitzer
50 .308 Nosler Accubond 200 gr Spitzer
500 .308 Sierra match 125 gr hp
9 mm brass
.40 S&W brass
.223 brass
LRP
1 lb Sport Pistol powder
500 rounds Black hills factory new 223 75 gr HP match ammo

Looking for:
Dillon 650 223 caliber conversion kit
10 mm 1911 magazines
Powder for 223/556
SPP
90 gr 9mm bullets
Red dot sight for a PCC
Cash

How much powder for the.
125 gr sierra both the Nosler 308 and the 77gr hornady.

WS88 · Mar 29, 2021

have:
50rds 77gr HPBT Freedom Munitions .223
50rds 69gr HPBT Freedom Muntions .223
60rds 26gr Green Tip .223
30rds 12Ga 2 3/4 1oz Slugs (Remington)
200rds .22LR sub sonic CCI
1lb Alliant Power Pistol
14.8 oz Alliant AR-COMP
13.8 oz IMR 4350
11.5 oz Hodgdon H322
1000 Large Rifle Primers CCI
1000 Small Rifle Primers CCI
about half a 5 gallon bucket of unprocessed 9mm casings (mostly Nickel casings)
about 1/3 of a 5 gallon bucket of unprocessed .223 brass

Looking for:
Small and Large Pistol primers
180gr .40 bullets
147gr 9mm blue bullets
sport pistol or N320 powder.

John from MD · Mar 29, 2021

Have one brick of PMC Scoremaster target .22 long rifle ammo. Standard velocity, Eley primed, hard to find stuff. I am looking to trade for 500 CCI Mini Mags.

Speedluvn · Mar 29, 2021

WS88 said:
have:
50rds 77gr HPBT Freedom Munitions .223
50rds 69gr HPBT Freedom Muntions .223
60rds 26gr Green Tip .223
30rds 12Ga 2 3/4 1oz Slugs (Remington)
200rds .22LR sub sonic CCI
1lb Alliant Power Pistol
14.8 oz Alliant AR-COMP
13.8 oz IMR 4350
11.5 oz Hodgdon H322
1000 Large Rifle Primers CCI
1000 Small Rifle Primers CCI
about half a 5 gallon bucket of unprocessed 9mm casings (mostly Nickel casings)
about 1/3 of a 5 gallon bucket of unprocessed .223 brass

Looking for:
Small and Large Pistol primers
180gr .40 bullets
147gr 9mm blue bullets
sport pistol or N320 powder.

Location? If you’re not too far, I’m interested in the unprocessed.223 brass.
I have 9mm projectiles but not sure of their weight.

Squaregrouper · Mar 29, 2021

WS88 said:
have:
50rds 77gr HPBT Freedom Munitions .223
50rds 69gr HPBT Freedom Muntions .223
60rds 26gr Green Tip .223
30rds 12Ga 2 3/4 1oz Slugs (Remington)
200rds .22LR sub sonic CCI
1lb Alliant Power Pistol
14.8 oz Alliant AR-COMP
13.8 oz IMR 4350
11.5 oz Hodgdon H322
1000 Large Rifle Primers CCI
1000 Small Rifle Primers CCI
about half a 5 gallon bucket of unprocessed 9mm casings (mostly Nickel casings)
about 1/3 of a 5 gallon bucket of unprocessed .223 brass

Looking for:
Small and Large Pistol primers
180gr .40 bullets
147gr 9mm blue bullets
sport pistol or N320 powder.

Also need to know your location.
I am interested in the Power Pistol and/or SRP. I have 180gr .40/10mm projectiles in: hard plate, FMJ and hard cast lead.

WS88 · Mar 29, 2021

I'm in severn area and not interested in any lead cast. And only primers for primers. In a pinch will use my rifle primers in pistol if have too, but would rather not. Pm me for more details/questions if interested.

WS88 said:
have:
50rds 77gr HPBT Freedom Munitions .223
50rds 69gr HPBT Freedom Muntions .223
60rds 26gr Green Tip .223
30rds 12Ga 2 3/4 1oz Slugs (Remington)
200rds .22LR sub sonic CCI
1lb Alliant Power Pistol
14.8 oz Alliant AR-COMP
13.8 oz IMR 4350
11.5 oz Hodgdon H322
1000 Large Rifle Primers CCI
1000 Small Rifle Primers CCI
about half a 5 gallon bucket of unprocessed 9mm casings (mostly Nickel casings)
about 1/3 of a 5 gallon bucket of unprocessed .223 brass

Looking for:
Small and Large Pistol primers
180gr .40 bullets
147gr 9mm blue bullets
sport pistol or N320 powder.

magnumpi · Mar 30, 2021

WS88 said:
have:
50rds 77gr HPBT Freedom Munitions .223
50rds 69gr HPBT Freedom Muntions .223
60rds 26gr Green Tip .223
30rds 12Ga 2 3/4 1oz Slugs (Remington)
200rds .22LR sub sonic CCI
1lb Alliant Power Pistol
14.8 oz Alliant AR-COMP
13.8 oz IMR 4350
11.5 oz Hodgdon H322
1000 Large Rifle Primers CCI
1000 Small Rifle Primers CCI
about half a 5 gallon bucket of unprocessed 9mm casings (mostly Nickel casings)
about 1/3 of a 5 gallon bucket of unprocessed .223 brass

Looking for:
Small and Large Pistol primers
180gr .40 bullets
147gr 9mm blue bullets
sport pistol or N320 powder.

Sent you a PM. I have large pistol primers to trade

firemn260 · Apr 1, 2021

I have:
200 38 cal 148gr WC
400 maybe more 38 cal 125gr plated
250 40 cal 180gr HP
1k cci #250 LRM
1k cci # 350 LPM

Looking for:
Standard or match LP
Standard or match LR
30 cal 168gr or up SMK
30 cal Berger 150gr FB match
45 cal fmj or cast

MDlineman · Apr 3, 2021

I am Looking for Dillon Square Deal B 45 acp conversion kit. I have primers, powder, projectiles, & factory ammo to trade. PM me if you are interested and want more info. I am not interested in trading for anything else at this time.

ohen cepel · Apr 5, 2021

270, 7.62-39, and 8mm bullet molds

Have one of each from Lee, 8mm is 175gr #90274 and the (I think) 7.62-39 is #90391, 160gr. Handle cracked on this one. I could not find that # on the web for 2nd (-39) Lee so am simply going by the hang tag on it.

8mm is 175gr SP from RCBS, no handles, just the mold with that one.

Other molds would be a good trade if you have spares; 45-70, 41mag, 30-30. Please PM me with what you may have. Pound of Leverevolution powder would be of interest on my end. Sizing dies are also a need on my end.

Looking to get these to people who can use them as they are not things I plan to cast/load for now.

Near Eldersburg so would like to meet around there if possible.

The Barter Thread

The #1 community for Gun Owners of the Northeast

Member Benefits:

2A Preacher

Ultimate Member

Member

Active Member

Member

Active Member

Ultimate Member

Bad influence

ΜΟΛΩΝ ΛΑΒΕ

Member

Member

Member

American Patriot

Active Member

Kragaphile

Member

Active Member

Active Member

Active Member

Ultimate Member

Users who are viewing this thread

Log in

Forum statistics