md_al
Active Member
I own the HK version, I am the second owner. I have about 5000 rounds through mine. It is a fun gun, its one of those you take out to plink with and have fun and are not doing anything too serious. If you get eh one with the collapsible stock it definitely is not a training gun due to inconsistent cheek weld. But fun factor I give it 8.5 out of 10. Field striping is not too bad pretty much tool-less on the HK one.
The A2 fixed stock is currently available at hkparts.net. A cheaper rail to mount a red dot sight can be had. I used the one for the airsoft mp5.
Like the 9mm mp5 the Walther HK mp5 has just 2 pushpins to separate the lower from the rest of the rifle. Can't be that hard to take apart right? As for cleaning I just use CLP to clean the gun and use the bore snake to clean the barrel.
If you go the GSG route you can replace the screws with the pushpins except for the one at the end cap would require a little modification. These are also available at the same site.
Of course my rifle was purchased through an IP.