I've got the 10mm bug, any memorial day deals?
And before you ask, no, I don't have a 10mm 80% karma coming up.
I've got the 10mm bug, any memorial day deals?
And before you ask, no, I don't have a 10mm 80% karma coming up.
Hahahaha! I just ordered components....let's say that I have more than a few to build. I'm off next week and will try to build some then
I somehow managed to lose the lower parts kit for one of mine. I am sure that it is in my man cave somewhere, but finding it may be a problem, especially since my step daughter helped "organize" a little in there the other week.
So completed, test fired and 90% there. Slide was reluctant to go home when soft cycling by hand. First mag, 3 out of 15 times slide didnt go completely home, gentle bump and fine. 2nd mag, only 1 time did it happen. After that all fed fine but did have one stovepipe. Clearly it's in the barrel channel, I'll relieve a little more and try again.
Ate 115gr,124gr,147gr and 158gr fine. Purposely limp wristed and seems to cycle fine.
Happy with it, I'm not a pistol guy but this just fits my hand perfectly. Now onto the g20 build.....
Thanks Kjackson.....if you cant locate your parts kit, I'll send you one.
So completed, test fired and 90% there. Slide was reluctant to go home when soft cycling by hand. First mag, 3 out of 15 times slide didnt go completely home, gentle bump and fine. 2nd mag, only 1 time did it happen. After that all fed fine but did have one stovepipe. Clearly it's in the barrel channel, I'll relieve a little more and try again.
The P80’s typically need a break in period, IMO. glad it went well.
It's really easy to do also, first one took a while as I was cautious and had no idea how to put the parts kit in. In fact I screwed up the trigger spring and it wouldn't reset the first time.
How many rounds before A ok? Probably have 110 or so through it now.
Excellent! But pix or it didn't happen!So completed, test fired and 90% there. Slide was reluctant to go home when soft cycling by hand. First mag, 3 out of 15 times slide didnt go completely home, gentle bump and fine. 2nd mag, only 1 time did it happen. After that all fed fine but did have one stovepipe. Clearly it's in the barrel channel, I'll relieve a little more and try again.
Ate 115gr,124gr,147gr and 158gr fine. Purposely limp wristed and seems to cycle fine.
Happy with it, I'm not a pistol guy but this just fits my hand perfectly. Now onto the g20 build.....
Thanks Kjackson.....if you cant locate your parts kit, I'll send you one.
G20 build didnt go as easy at all. The LSB as they called it was too wide, the slide wouldn't move barely at all. Grinded some of the metal off and much better.
Ran into issues with the slide NOT going back all the way. Took on and off 30 times and still couldn't figure it out. Went to Google....apparently the firing pin safety plunger is the issue. If I depress the plunger and push the firing pin towards the muzzle, slide goes all the way back and seems to function correctly.
So is my firing pin safety plunger out of spec? I'll probably order another it's less than $5. But the few hours of me scratching my head I cant get back lol.
How far is brass throwing from your 80 builds? I broke one in recently and it didn't seem to throw very far. Had one stovepipe too. Other than that, it ran 50 rounds nicely.
That sounds like something I just might have to do. Let me see if I can build this one first.
How far is brass throwing from your 80 builds? I broke one in recently and it didn't seem to throw very far. Had one stovepipe too. Other than that, it ran 50 rounds nicely.
How far is brass throwing from your 80 builds? I broke one in recently and it didn't seem to throw very far. Had one stovepipe too. Other than that, it ran 50 rounds nicely.
I have found it takes a couple hundred rounds through mine to work out the bugs..
I may or may not have a few 9mm. I may or may not have found that it’s best to hit it with 100 rounds of good hot ammo first.