I took my wife shooting once. She put 7 rounds in the 10 ring from about 30 feet with a Colt .45 ACP. Scared the crap out of me. She is a rocket scientist.
The Official AR-15 Picture Thread
- Thread starter AKbythebay
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
I took my wife shooting once. She put 7 rounds in the 10 ring from about 30 feet with a Colt .45 ACP. Scared the crap out of me. She is a rocket scientist.
tmo8320
Active Member
- Mar 31, 2019
- 296
- Daniel Defense M4V7P LAW folder, chambered in 300 BLK.
- Radian Raptor charging handle
- Eotech EXPS 3-0 holo sight
- Troy industries folding iron sights
- SB A3 arm brace
- Ferro Concepts Slingster weapon sling
Sent from my iPhone using Tapatalk
Last edited by a moderator:
- Apr 16, 2017
- 172
My 2 AR15's.
First is a FN FN15 MD Heavy Carbine (16" HBAR)
With OD Green Magpul furniture (as well as BAD Lever and Enhanced Mag Release), a Radian Raptor Ambi Charging Handle, otherwise stock and a Primary Arms 5x Prism.
Otherwise stock. Plan to put in a Radian Talon Ambi Safety (I am ambidextrous so I like the flexibility, even though its not an essential thing.)
Second is my home built one I finished just tonight, hope to get some range time tomorrow.
Noveske Gen1 Lower
Engage Armament Billet Upper
Engage Armament/White Oak 18" HBAR Barrel Rifle Length Gas System
Midwest Industries MI-G3M17XR 17.5 Inch Free Float Handguard
Velocity Triggers 4lb Pull
Toolcraft BCG
Radian Raptor Ambi Charging Handle and Talon Ambi Safety
Lantac Dragon Muzzle Device
Magpul FDE Furniture/Accy (BAD Lever, Enhanced Mag Release and ASAP QD Sling endplate)
UTG Buffer Tube and Buffer
S&W M&P Upper and Lower kits for springs/mag catch/bolt catch/detents/etc
Your sights are on backwards
AR-9
Endomags
I've since updated the TRS-25 to a Holosun 503C-ACSS, added a pair of MBUS, changed grip to my favorite (BCM Mod 3) and changed the flash cone to this and added this 3-lug adapter to end of the barrel. Octane 45K is in NFA jail (10+ months) and will go on the 3-lug when stamp comes back.
Full build list
Endomags
I've since updated the TRS-25 to a Holosun 503C-ACSS, added a pair of MBUS, changed grip to my favorite (BCM Mod 3) and changed the flash cone to this and added this 3-lug adapter to end of the barrel. Octane 45K is in NFA jail (10+ months) and will go on the 3-lug when stamp comes back.
Full build list
budman93
Ultimate Member
Yup, that was bothering me too.
jamesp15
Active Member
Me too.
Fixed now, Took them off the FN since it has an optic. The FN ones came attached from the factory in that orientation I just slid the rear one forward. Never really looked into the "correct" orientation before, they work fine backwards though
Fixed now, Took them off the FN since it has an optic. The FN ones came attached from the factory in that orientation I just slid the rear one forward. Never really looked into the "correct" orientation before, they work fine backwards though
No worries. We are just bustin’ your chops.
Sent from my iPhone using Tapatalk
No worries. We are just bustin’ your chops.
Sent from my iPhone using Tapatalk
That's right, around MDS there's lots of chop bustin....
Tip to tail;
In Lead We Trust 3-lug flash cone
(Will be replaced by Silencerco Octane 45k can. Has been in NFA jail 10+ months now)
BA 5.5" 9mm barrel w/ 3-lug adapter
ALG EMRV2 keymod rail 8"
SI Link Curved foregrip
BCM heat shields
Magpul BUIS
BCM keymod piccany rail w/ PL-2 Valkyrie
Aero lower/standard AR15 upper
Running Pmag M3 with Endomag guts (1200+ rounds and zero issues)
Seperate pic of the Endomags [https://i.redd.it/oqkk2x28sf721.jpg]
Faxxon 9mm BCG
Strike Industries LPK
ALG ACT trigger
Magpul BAD lever
Holosun HS503G-ACSS
WMD NiB charging handle w/ SI extended latch
BCM Mod 3 grip
Law Tactical folding adapter
Blitzkrieg hydraulic buffer w/ BLUE spring
SBA3 brace w/ lunar concepts splitfix strap
Since I picked up two Colt HBARs in their vintage 90s trim I decided to change the furniture on my trusty franken AR HBAR since it was a little redundant.
Basic lower and J&T upper A2 actually my first complete AR back in the day
Brownells Retro AR furniture set supposedly correct for 1959 by Airforce. Would be better with an A1 upper maybe someday as I have some pre and post FSA stuff I can move around. Got the set for less than $60 shipped so fun swap
Basic lower and J&T upper A2 actually my first complete AR back in the day
Brownells Retro AR furniture set supposedly correct for 1959 by Airforce. Would be better with an A1 upper maybe someday as I have some pre and post FSA stuff I can move around. Got the set for less than $60 shipped so fun swap
Attachments
ground chuck
Rookie Jedi
A bit of toe and some white new balance kicks.
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
I really like the vintage-looking AR's. One day when I move out of state, I will get a pencil barrel correct other than full auto retro AR.
SCARCQB
Get Opp my rawn, Plick!
Russ D
Ultimate Member
Vile Shadow
...
- Feb 28, 2013
- 28,953
Vile Shadow
...
- Feb 28, 2013
- 28,953
bkuether
Judge not this race .....
That sir is quite spiffy !!!!!! Never thought of putting modern furniture on an A2......
Vile Shadow
...
- Feb 28, 2013
- 28,953
Users who are viewing this thread
Latest posts
-
-
-
-
-
Just want to thank the extremely awesome folks at Tyler Firearms (13 Viewers)
- Latest: legendindisguise
-
Forum statistics
Latest threads
-
Just want to thank the extremely awesome folks at Tyler Firearms (13 Viewers)- Started by GenoBluzGtr
- Replies: 4
-
-
Clearance Liqui Moly Motorbike 4T SAE 15W-50 Street | Full Synthetic Motor Oil | 4 Liter (3 Viewers)- Started by mpollan1
- Replies: 3
-
-
-
-
