9mm luger.. Let's see you recipes!

Streetgang · Feb 18, 2013

I'm using:
115 gr FMJ
CCI small pistol primers
4.0gr of bullseye
1.12COL (almost forgot this.)

Makes for a smooth firing round. I'm shooting this in a MAG 98 currently and have NO feed issues. Accuracy is excellent.

OldSchool1959 · Feb 18, 2013

I'm using:
115 gr Rainier plated round nose
CCI/Winchester small pistol primers
3.8 gr of Bullseye
1.12 COL
Crimped lightly with Lee FCD

Shoots just fine and cycles my PT 92AF without issue.

lx1x · Feb 18, 2013

124gr rn plated
1.10 oal
cci primers
4.2gr titegroup(for xdm and sig) but recently did 4.0gr for g34 (was keyholing with 4.2)

Winterborn · Feb 18, 2013

115gr FMJ RN, Winchester bullets
4.3gr titegroup with CCI SP

Can't remember OAL, w/e the speer manual says.

mbz300sdl · Feb 18, 2013

I'm using:
115 gr Berry's plated round nose
CCI/Federal/Tula small pistol primers
4.4 gr of Bullseye

Shoots great out of every gun I have shot it out of

jason.krywicki · Feb 18, 2013

147 gr Berry plated
3.5 gr VV N320
Federal gold medal match small pistol primer
1.145" OAL

Very soft shooter that makes about a 133 PF out of a Glock 34.

Jason

guthook · Feb 18, 2013

Powder puff load. Should be great for suppressed autos.

3.3gr Titegroup, Berrys Plated 147gr, Win SPP, OAL 1.160

Chronographed from a Ruger P-89 I was getting ~850-900fps.

No chrono data for my Beretta yet.

HarCo2ANewb · Feb 18, 2013

115gr Berry's Plated RN
4.3gr W231
Win SP
1.20 COAL

f1racecar · Feb 18, 2013

I am getting good results with W231.

f1racecar · Feb 18, 2013

f1racecar said:
I am getting good results with W231.

Sorry:

I'm using:
115 gr FMJ
CCI small pistol primers
4.4 gr W231

On_Target · Feb 18, 2013

jason.krywicki said:
147 gr Berry plated
3.5 gr VV N320
Federal gold medal match small pistol primer
1.145" OAL

Very soft shooter that makes about a 133 PF out of a Glock 34.

Jason

Great load jason. I love the Vv. Thanks.

soup101 · Feb 19, 2013

147 Montana Gold CMJ
3.6 gr VV N320
Federal gold medal match
1.142 COL

Soft shooting and much more accurate then I am. PF is around 127 out of an M&P Pro.

Flipz · Feb 19, 2013

147gr Precision Delta FMJ RN
3.4gr's Titegroup
Win SPP's
OAL 1.145

This is the load I use for just about everything. From bullseye shooting to the subsonic load I prefer for suppressed shooting.

Buddy · Feb 19, 2013

115gr RN
CCI SPP
4.0gr Unique
OAL 1.115

NRA-Benefactor · Feb 19, 2013

115gr HP Raineer balistics
CCI spp
4.2 Titegroup
1.070 oal

Streetgang · Feb 19, 2013

This is great. While nobody should trust only what they see on the internet, this is a really good source to see what works for each of us.

j8064 · Feb 19, 2013

The rounds in my post (#24) here: http://www.mdshooters.com/showthread.php?t=106125 are loaded with 124 gr cast WW lead from the Lee mold pictured on top of 4.5 gr of Unique. They faithfully and accurately go bang every time.

pulplv · Feb 21, 2013

9mm

124 gr. Armscor FMJ over 4.3 gr. of Red Dot

Song Dog · Feb 21, 2013

Anyone loaded Power Pistol (powder) in the 9 MM ? looking for some feedback

lx1x · Feb 21, 2013

Song Dog said:
Anyone loaded Power Pistol (powder) in the 9 MM ? looking for some feedback

i used to.. nothing wrong with it.. just favor the titegroup. will try univ. clay in the future.

9mm luger.. Let's see you recipes!

The #1 community for Gun Owners of the Northeast

Member Benefits:

OP4

Active Member

Peanut Gallery

Moved to Texas

Gone living free now!!!

Active Member

Grrr.

Subibro

Member

Member

Active Member

Active Member

Ultimate Member

Member

Defend Freedom

OP4

Garrett Co Hooligan #1

Member

Active Member

Peanut Gallery

Users who are viewing this thread

Log in

Forum statistics