Go Back   Maryland Shooters > The Arsenal > Handguns

Notices


Reply
 
Thread Tools Display Modes
Old March 20th, 2017, 06:45 PM #171
turbogrimace turbogrimace is offline
Junior Member
 
Join Date: Jan 2014
Location: northern maryland
Posts: 53
turbogrimace turbogrimace is offline
Junior Member
 
Join Date: Jan 2014
Location: northern maryland
Posts: 53
Quote:
Originally Posted by Sticky View Post
I saw a post on FB from P80 in regards to Brownells having their first shipment and another was on the way. Not sure which models, but I'm sure it was all compacts.
I just got a notification that my stippled p80 shipped from brownells. A bit surprise by the cost of shipping.
turbogrimace is offline   Reply With Quote
Old March 20th, 2017, 07:03 PM #172
cantstop's Avatar
cantstop cantstop is offline
. . .
 
Join Date: Aug 2012
Location: HoCo
Posts: 3,110
cantstop cantstop is offline
. . .
cantstop's Avatar
 
Join Date: Aug 2012
Location: HoCo
Posts: 3,110
Quote:
Originally Posted by turbogrimace View Post
I just got a notification that my stippled p80 shipped from brownells. A bit surprise by the cost of shipping.
Why? The shipping is clearly indicated before you click confirm on your order. It is also sent with the order confirmation email, along with the phone number and email address for Brownell's customer service.
cantstop is offline   Reply With Quote
Old March 20th, 2017, 07:35 PM #173
Sticky's Avatar
Sticky Sticky is offline
Beware of Dog
 
Join Date: Mar 2013
Location: AA Co
Posts: 3,624
Sticky Sticky is offline
Beware of Dog
Sticky's Avatar
 
Join Date: Mar 2013
Location: AA Co
Posts: 3,624
Quote:
Originally Posted by vgplayer View Post
However the Polymer80 chose a picatinny rail which appears to encroach more into the frame. I get my frame Thursday and I'll put together a drawing.

Yes, that was my concern.. there is very little meat there where the slide cut at the front intersects the pic rail grooves. It may not be an issue if you don't 'use' the pic rail, but there is only about .080" of meat there at that point when I measure it with calipers.
__________________
MSI Supporting member
NRA Life Member
Twelfth Precinct Pistol and Archery Club/AGC
Archery and Firearm Fanatic
Sticky is offline   Reply With Quote
Old March 20th, 2017, 07:47 PM #174
Fox123's Avatar
Fox123 Fox123 is offline
Senior Member
 
Join Date: May 2012
Location: Rosedale, MD
Posts: 2,641
Fox123 Fox123 is offline
Senior Member
Fox123's Avatar
 
Join Date: May 2012
Location: Rosedale, MD
Posts: 2,641
Anyone know best price out there for G26 magazines?
Fox123 is offline   Reply With Quote
Old March 20th, 2017, 07:54 PM #175
Muleskinner's Avatar
Muleskinner Muleskinner is online now
Member
 
Join Date: Apr 2013
Location: East of the Mississippi West of the Atlantic..
Posts: 839
Muleskinner Muleskinner is online now
Member
Muleskinner's Avatar
 
Join Date: Apr 2013
Location: East of the Mississippi West of the Atlantic..
Posts: 839
Just finished a G22 clone with the large frame kit. Ordered a .22LR conversion and going to put it on a dedicated frame for a plinker and training. Works fine...although I didn't use the jig for the rear rails and I didn't use the end mill they sent for the upper frame media removal...I did that with a dremel...I got way better results although it took longer.
__________________
Muleskinner is online now   Reply With Quote
Old March 20th, 2017, 08:01 PM #176
Muleskinner's Avatar
Muleskinner Muleskinner is online now
Member
 
Join Date: Apr 2013
Location: East of the Mississippi West of the Atlantic..
Posts: 839
Muleskinner Muleskinner is online now
Member
Muleskinner's Avatar
 
Join Date: Apr 2013
Location: East of the Mississippi West of the Atlantic..
Posts: 839
Quote:
Originally Posted by turbogrimace View Post
I just got a notification that my stippled p80 shipped from brownells. A bit surprise by the cost of shipping.
Polymer 80 shipped me a warranty replacement frame last week, USPS shipping was $7.40 from Nevada..Brownell's is in IN I think...
__________________
Muleskinner is online now   Reply With Quote
Old March 20th, 2017, 08:01 PM #177
boundlessdyad's Avatar
boundlessdyad boundlessdyad is offline
boundlessdyad
 
Join Date: Apr 2013
Location: HoCo
Posts: 16,756
boundlessdyad boundlessdyad is offline
boundlessdyad
boundlessdyad's Avatar
 
Join Date: Apr 2013
Location: HoCo
Posts: 16,756
Quote:
Originally Posted by Muleskinner View Post
Just finished a G22 clone with the large frame kit. Ordered a .22LR conversion and going to put it on a dedicated frame for a plinker and training. Works fine...although I didn't use the jig for the rear rails and I didn't use the end mill they sent for the upper frame media removal...I did that with a dremel...I got way better results although it took longer.
What .22 LR kit did you order mule? If you got the advantage arms and want to test a tactical solutions I'd be happy to let you give it a try. What part of the state are you in?
boundlessdyad is offline   Reply With Quote
Old March 20th, 2017, 08:10 PM #178
Muleskinner's Avatar
Muleskinner Muleskinner is online now
Member
 
Join Date: Apr 2013
Location: East of the Mississippi West of the Atlantic..
Posts: 839
Muleskinner Muleskinner is online now
Member
Muleskinner's Avatar
 
Join Date: Apr 2013
Location: East of the Mississippi West of the Atlantic..
Posts: 839
Quote:
Originally Posted by boundlessdyad View Post
What .22 LR kit did you order mule? If you got the advantage arms and want to test a tactical solutions I'd be happy to let you give it a try. What part of the state are you in?
I bought the Tactical Solutions kit with the 10 round mag and the threaded barrel. It hasn't arrived yet so I am completing the frame while I wait for it. I read reviews on the 3 that I could find...TS, AA and ZEV..Zev was too expensive. I bought the TS because the reviews were a tiny bit better..My thought it this..I bought it for practice. 22LR is a lot less expensive than 40S&W...If the gun fails to load, fails to eject or jams in any other way, it adds realism to practice...You never know when your weapon will stove pipe or double..it's just as important to learn to clear and recover quickly as it is to hit what you are aiming for..And thanks for the offer, but between running my business and a very ill father in law I don't have a lot of free time other than late at night..Maybe after things in my life settle down a bit we can go test them...I am in the Halethorpe zip code.
__________________
Muleskinner is online now   Reply With Quote
Old March 20th, 2017, 08:17 PM #179
boundlessdyad's Avatar
boundlessdyad boundlessdyad is offline
boundlessdyad
 
Join Date: Apr 2013
Location: HoCo
Posts: 16,756
boundlessdyad boundlessdyad is offline
boundlessdyad
boundlessdyad's Avatar
 
Join Date: Apr 2013
Location: HoCo
Posts: 16,756
Quote:
Originally Posted by Muleskinner View Post
I bought the Tactical Solutions kit with the 10 round mag and the threaded barrel. It hasn't arrived yet so I am completing the frame while I wait for it. I read reviews on the 3 that I could find...TS, AA and ZEV..Zev was too expensive. I bought the TS because the reviews were a tiny bit better..My thought it this..I bought it for practice. 22LR is a lot less expensive than 40S&W...If the gun fails to load, fails to eject or jams in any other way, it adds realism to practice...You never know when your weapon will stove pipe or double..it's just as important to learn to clear and recover quickly as it is to hit what you are aiming for..And thanks for the offer, but between running my business and a very ill father in law I don't have a lot of free time other than late at night..Maybe after things in my life settle down a bit we can go test them...I am in the Halethorpe zip code.
Cool, not far at all, I am right behind 2A sales.

I have six of the 15 round mags for the tactical solutions set up which I bought because it works on all gen Glock's.

The kit works best with mini mags for sure but there are other brands that work well also.
boundlessdyad is offline   Reply With Quote
Old March 20th, 2017, 08:30 PM #180
Sticky's Avatar
Sticky Sticky is offline
Beware of Dog
 
Join Date: Mar 2013
Location: AA Co
Posts: 3,624
Sticky Sticky is offline
Beware of Dog
Sticky's Avatar
 
Join Date: Mar 2013
Location: AA Co
Posts: 3,624
Quote:
Originally Posted by Fox123 View Post
Anyone know best price out there for G26 magazines?
I hate to say it, but CTD had the best prices I could find on 19 mags..


   
__________________
MSI Supporting member
NRA Life Member
Twelfth Precinct Pistol and Archery Club/AGC
Archery and Firearm Fanatic
Sticky is offline   Reply With Quote
Reply

  Home Page > Forum List > The Arsenal > Handguns


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:00 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
2017, Congregate Media, LP Privacy Policy Terms of Service