Sub-2000 and CZ-75 mags

wynnstudio · Aug 31, 2011

So I read on the interwebs that one may be able to use CZ-75 magazines in a Sub-2000 that takes metal mags and not glock. Most Sub-2000's are shipped setup for beretta 92FS mags. Which is what I purchased. You can contact Kel-Tec to get a different mag catch for free. It turns out the the notch for the Sig mag catch also lines up with CZ-75 mags.

Swapped the part out today and hit the range. All my CZ-75 mags worked

1 mag was a factory pre-B and the 3 were Mec-Gar's

wynnstudio

Jimbob2.0 · Aug 31, 2011

wynnstudio said:
So I read on the interwebs that one may be able to use CZ-75 magazines in a Sub-2000 that takes metal mags and not glock. Most Sub-2000's are shipped setup for beretta 92FS mags. Which is what I purchased. You can contact Kel-Tec to get a different mag catch for free. It turns out the the notch for the Sig mag catch also lines up with CZ-75 mags.

Swapped the part out today and hit the range. All my CZ-75 mags worked 1 mag was a factory pre-B and the 3 were Mec-Gar's

wynnstudio

Thats good to know..........I have been jonsing for a Sub that fits my CZ and Sig226 and thinking of dunmping all the glock stuff.

fivepointstar · Aug 31, 2011

IIRC in 9mm they take Beretta 92, SIG P226, Glock 17, and S&W 59 series pistols. As far as .40 cal i'm assuming the same 4 pistols just in .40. I had a buddy that had a Sub2K in Glock 22 mags

wynnstudio · Aug 31, 2011

Mine is 9mm, no idea if the trick works with the 40.

from Kel-tec:

The 9mm SUB-2000 can be configured in the following magazine types: GLK17, GLK19, S&W59, BERETTA92, SIG226.

The .40 SUB-2000 can be configured in the following magazine types: GLK22, GLK23, BERETTA96, S&W4006, SIG226.

wynnstudio

Jimbob2.0 · Aug 31, 2011

wynnstudio said:
Mine is 9mm, no idea if the trick works with the 40.

from Kel-tec:

The 9mm SUB-2000 can be configured in the following magazine types: GLK17, GLK19, S&W59, BERETTA92, SIG226.

The .40 SUB-2000 can be configured in the following magazine types: GLK22, GLK23, BERETTA96, S&W4006, SIG226.

wynnstudio

Ya I just wish they would make a .357 sig one to go with one of my favorite shooting rounds.

fivepointstar · Aug 31, 2011

fivepointstar said:
IIRC in 9mm they take Beretta 92, SIG P226, Glock 17, and S&W 59 series pistols. As far as .40 cal i'm assuming the same 4 pistols just in .40. I had a buddy that had a Sub2K in Glock 22 mags

wynnstudio said:
Mine is 9mm, no idea if the trick works with the 40.

from Kel-tec:

The 9mm SUB-2000 can be configured in the following magazine types: GLK17, GLK19, S&W59, BERETTA92, SIG226.
wynnstudio

Cool I think i got that right!

wynnstudio · Aug 31, 2011

fivepointstar said:
Cool I think i got that right!

better at it then me - I had to look it up.

I just fixated in the Sig to CZ trick

wynnstudio

JOBU · Aug 31, 2011

I wished they made one for the SR9 clips.

wynnstudio · Aug 31, 2011

JOBU said:
I wished they made one for the SR9 clips.

I bet a machinist could make an adapter for one. As long as the mag catch is in the range of S&W59, BERETTA92, SIG226.

It's just a metal adaptor about 3/4"long with the catch located to correspond with the different mags. I'll take a pic of the one I removed.

wynnstudio

GoGoGadget · Sep 2, 2011

Ooooh! Sweet!

I wonder if I can convert my Glock Sub-2000 to CZ? Is it really as simple as called them and they send the part?

jimbobborg · Sep 2, 2011

GoGoGadget said:
Ooooh! Sweet!

I wonder if I can convert my Glock Sub-2000 to CZ? Is it really as simple as called them and they send the part?

The Glock mag ones can't be converted.

Jim

GoGoGadget · Sep 2, 2011

jimbobborg said:
The Glock mag ones can't be converted.

Jim

Thanks Jim. I just came that conclusion too reading on the KTOG forums...

jimbobborg · Sep 2, 2011

GoGoGadget said:
Thanks Jim. I just came that conclusion too reading on the KTOG forums...

There's probably a few thousand people who would love to get their hands on your Glock mag Sub2K. I suspect you could probably sell yours for more than you paid for it and get the Sig version at NOVA Armament. Just a thought.

Jim

GoGoGadget · Sep 2, 2011

jimbobborg said:
I suspect you could probably sell yours for more than you paid for it and get the Sig version at NOVA Armament. Just a thought.

Jim

Yeah, I've had a couple on the spot offers at the range. Good idea. I'll have to ponder that...

wynnstudio · Sep 2, 2011

jimbobborg said:
There's probably a few thousand people who would love to get their hands on your Glock mag Sub2K. I suspect you could probably sell yours for more than you paid for it and get the Sig version at NOVA Armament. Just a thought.

Jim

What he said

Thomas

fivepointstar · Sep 2, 2011

jimbobborg said:
There's probably a few thousand people who would love to get their hands on your Glock mag Sub2K. I suspect you could probably sell yours for more than you paid for it and get the Sig version at NOVA Armament. Just a thought.

Jim

I have one

erwos · Sep 2, 2011

I think we need a Sub-2k event at Freestate!

bruss01 · Dec 5, 2011

I just ordered the "Beretta" model in .40 hoping to add the SIG mag catch and convert to use my .40 CZ 75b magazines.

I will take some photos once I have the rifle and magazines in hand. I did verify that the mags for the .40 fit properly in my 9mm CZ - if the Beretta 92 mags fit in the Beretta 96 mag well and the 9mm and .40 SIG pistols catch when swapped, then I suspect the CZ mags will interchange as well.

Here's knocking on wood!

Minuteman · Dec 5, 2011

erwos said:
I think we need a Sub-2k event at Freestate!

Yep!

mudskipper · Dec 6, 2011

jimbobborg said:
The Glock mag ones can't be converted.

Jim

Why would you need to?

It's already running GLOCK!

Sub-2000 and CZ-75 mags

The #1 community for Gun Owners of the Northeast

Member Benefits:

"Member"

Ultimate Member

Thank you MD-Goodbye

"Member"

Ultimate Member

Thank you MD-Goodbye

"Member"

Banned

"Member"

Deplorable Member

Oddball caliber fan

Deplorable Member

Oddball caliber fan

Deplorable Member

"Member"

Thank you MD-Goodbye

The Hebrew Hammer

Member

Member

Banned

Users who are viewing this thread

Log in

Forum statistics