The Barter Thread

bigmancrisler · May 16, 2022

PlumberEd said:
Thank you Bigmancrisler for the Varget trade. Great meeting you today. Thank you.

Thanks you as well.

Sent from my iPhone using Tapatalk

bigmancrisler · May 22, 2022

Does anyone have any 7mm mauser and 7.5 French brass? I just came into both a Mas36/51 and a FN49 in 7mm.

Lmk what your looking for.

Sent from my iPhone using Tapatalk

John from MD · May 22, 2022

bigmancrisler said:
Does anyone have any 7mm mauser and 7.5 French brass? I just came into both a Mas36/51 and a FN49 in 7mm.

Lmk what your looking for.

Sent from my iPhone using Tapatalk

I may have a 7x57 form and trim die I would give you if you want to make 7mm out of 30-06. They will work fine in Dieudonne Saive's baby.

Also, I used .308 cases and .308 bullets for years in my take home Model 36 with good accuracy and no problems using IMR 4895 powder.

After the first time a .308 case is fired, it will fill the chamber and bulge a little at the base. From then on, you only neck size the brass by backing out your .308 size die and use a Lee FCD crimp die to crimp the shorter case neck. If you have too, grind down the bottom of the collet sleeve to bring down the crimp.

Enjoy, they are both great shooting guns.

bigmancrisler · May 22, 2022

John from MD said:
I may have a 7x57 form and trim die I would give you if you want to make 7mm out of 30-06. They will work fine in Dieudonne Saive's baby.

Also, I used .308 cases and .308 bullets for years in my take home Model 36 with good accuracy and no problems using IMR 4895 powder.

After the first time a .308 case is fired, it will fill the chamber and bulge a little at the base. From then on, you only neck size the brass by backing out your .308 size die and use a Lee FCD crimp die to crimp the shorter case neck. If you have too, grind down the bottom of the collet sleeve to bring down the crimp.

Enjoy, they are both great shooting guns.

Didn’t know you could do that, Id still prefer purpose built brass but I’ll have to give it a try. Thanks!

Sent from my iPhone using Tapatalk

guzma393 · May 23, 2022

Looking for 54r brass, boxer preferred, but can work with berdan primed cases. PM me what you are looking to trade them for. Can meet FTF AGC or a reasonable distance in the middle from Columbia.

85MikeTPI · May 28, 2022

Looking for 338 Lapua Brass and maybe .338 match boolits. I have:
-Rem 1-1/2 SPP primers
-CCI 500 SPP primers
-Hornady .308 225gr ELD-X boolits.
-Nosler .308 168gr CC boolits.
-Berger .308 190gr Match boolits.
-Barnes Match burner or Nosler RDF 6.5mm 140gr boolits.
-IMR 800x powder
-Federal AE223BKX bulk pkg 1000rnds.
- probably more that I'm forgetting

platekiller · May 28, 2022

I’ve got a few reloading books for trade. My biggest need is some small rifle primers (mag or standard). I need like 400 of them but open to anything I can use.

Squaregrouper · May 30, 2022

FOUND IT!!!

Triggerfinger · Jun 3, 2022

I Have the following for trade:

FEDERAL 205M SMALL RIFLE 3,000
FEDERAL 205 SMALL RIFLE 2,000

Looking for Remington 9 1/2 . Meet in Harford County.

kstone803 · Jun 7, 2022

Still in need of about 100-150 pieces of .243 brass. Have ammo, powder, other brass, primers to trade. Let me know

gungate · Jun 10, 2022

Will trade 3lbs (3 x 1) of brand new Ramshot Enforcer Smokeless Handgun powder for large pistol primers, 45LC brass, or powder better suited to cowboy action loads using LRNFP bullets.

85MikeTPI · Jun 12, 2022

I have 2lbs Varget, 2 1K bricks of Rem 9-1/2 LRPs

I'm looking for Lapua headstamp 338LapuaMag brass, Fed 210 primers, and Fed 215 primers.

Harrys · Jun 12, 2022

85MikeTPI said:
I have 2lbs Varget, 2 1K bricks of Rem 9-1/2 LRPs

I'm looking for Lapua headstamp 338LapuaMag brass, Fed 210 primers, and Fed 215 primers.

Not a trade but in stock

.338 Lapua Magnum Once Fired Brass from Diamond K Brass

.338 Lapua MAG in stock and ready to ship! From DKB

www.diamondkbrass.com

4g64loser · Jun 23, 2022

I have:
Brass decapped and wet tumbled: 308, 223, 45-70, 45LC, 44 mag, 38spl, 357mag
Pistol brass fully processed: 9x19
Rifle brass fully processed (wet tumbled, annealed, FL size, trim): 308, 223, 6.5 creedmoor
Projectiles: sierra .308 150 soft points, 165 soft points

I want:
284 brass
6br brass
.224 pills- speer 75 or 62 gold dot
.243 pills- Berger 88 varmint, 105 hybrid, Nosler 107cc, sierra 85 hpbt gameking
.264 pills- Berger 140 hybrid, 130 hybrid, Nosler 140 rdf, speer 140 gold dot
RL19, benchmark powders
Cci 200, 400, 450 primers (current production only)

gungate · Jun 24, 2022

4g64loser said:
I have:
Brass decapped and wet tumbled: 308, 223, 45-70, 45LC, 44 mag, 38spl, 357mag
Pistol brass fully processed: 9x19
Rifle brass fully processed (wet tumbled, annealed, FL size, trim): 308, 223, 6.5 creedmoor
Projectiles: sierra .308 150 soft points, 165 soft points

I want:
284 brass
6br brass
.224 pills- speer 75 or 62 gold dot
.243 pills- Berger 88 varmint, 105 hybrid, Nosler 107cc, sierra 85 hpbt gameking
.264 pills- Berger 140 hybrid, 130 hybrid, Nosler 140 rdf, speer 140 gold dot
RL19, benchmark powders
Cci 200, 400, 450 primers (current production only)

How much 45LC?

4g64loser · Jun 24, 2022

gungate said:
How much 45LC?

Not much. 46pcs. One of my friends oopsed thinking it was 41 mag brass. He doesn't reload, so I can't say his mistake makes me worry.

guzma393 · Jun 24, 2022

I have ~250 lbs of pure lead from cut keel blocks, and other misc sources. Want to trade 1:1 for WW or range scrap hardness (10-12 bhn) hardness lead. Can consider other lead (linotype, foundry, etc.). Based in Columbia, shoot at AGC, can FTF anywhere in a reasonable vicinity for both.

gungate · Jun 25, 2022

4g64loser said:
Not much. 46pcs. One of my friends oopsed thinking it was 41 mag brass. He doesn't reload, so I can't say his mistake makes me worry.

Where are you? I would trade either of the below for it.

85MikeTPI · Jun 25, 2022

guzma393 said:
I have ~250 lbs of pure lead from cut keel blocks, and other misc sources. Want to trade 1:1 for WW or range scrap hardness (10-12 bhn) hardness lead. Can consider other lead (linotype, foundry, etc.). Based in Columbia, shoot at AGC, can FTF anywhere in a reasonable vicinity for both.

Just curious why you don’t alloy it yourself? Grab 80lbs of Linotype from Brickman301 and turn that 250lbs pure into ~330lbs Lyman #2

If you’re looking for anything else in trade, I’d be happy to discuss grabbing the pure from you and alloy it

guzma393 · Jun 26, 2022

Inflation and cost of living got me penny pinching right now

Just making do on what i got. Id be happy to barter for some linotype for the pure lead so I can alloy it.

Not needing anything in particular, but primers and powder are always something I am willing to consider.

The Barter Thread

The #1 community for Gun Owners of the Northeast

Member Benefits:

2A Preacher

2A Preacher

American Patriot

2A Preacher

Active Member

Ultimate Member

Ultimate Member

Kragaphile

States Rights!

Official Meat Getter

NRA Patron Member

Ultimate Member

Short Round

Bad influence

NRA Patron Member

Bad influence

Active Member

NRA Patron Member

Ultimate Member

Active Member

Users who are viewing this thread

Log in

Forum statistics