This is random.. but..
Let’s say a scope gets sent back to a manufacturer and the customer claims it is not holding zero.
How does the manufacturer test the scope to see if it holds zero?
On cheaper scopes they typically don't bother testing/repairing. They just replace if under warranty. When you get north of $1k optics they would likely test and possibly repair.
I know both Vortex & Leupold have extensive test equipment such as a shock tester, reticle cant, lens culminating etc. I know a guy that recently sent back a Razor G2 4.5-27 for a canted reticle. Vortex tested corrected and returned in a week.
While I'm sure it has probably happened, I've personally never heard of anyone having an issue with a properly installed scope that's north of a couple hundred bucks from companies like Leupold, Burris, Redfield, etc.On cheaper scopes they typically don't bother testing/repairing. They just replace if under warranty. When you get north of $1k optics they would likely test and possibly repair.
I know both Vortex & Leupold have extensive test equipment such as a shock tester, reticle cant, lens culminating etc. I know a guy that recently sent back a Razor G2 4.5-27 for a canted reticle. Vortex tested corrected and returned in a week.
While I'm sure it has probably happened, I've personally never heard of anyone having an issue with a properly installed scope that's north of a couple hundred bucks from companies like Leupold, Burris, Redfield, etc.
Last weekend I shot a group dead on the money at 100 yards with a 25-06 rifle topped by a Redfield scope, both of which may be older than me (I'm 50) and the scope was probably last zeroed the day it was originally zeroed - I don't ever remember my Dad messing with it - he'd simply pull the gun out of the bag, and then drill prairie dogs all day with it, shots out to 300+ yards, with only the occasional rare miss. Those shots I took last weekend were the first shots down the bore of that gun in over 20 years - I think the last time it was fired was probably summer of 1996. (Dad died in 1997)
Heard that. Since I bought this scope, I have been putting far more weight on made in America quality.
It just sucks to sent many rounds and sabots down range to come to the conclusion that the scope is defective.
And, gun season is this Saturday..
I’ll probably get a vortex for the 220 now.
I have had maybe 7 or 8 Nikon scopes. I’ve been pretty happy with them, except this one.
With Nikon being out of the game, I wonder what they will do... I heard they will give vouchers for other sporting optics, and honestly I need a set of bino’s... but still I now probably need to get a scope for my 220.
The thing would shoot 4 inches low at 100. Is raise 4 MOA up, then the shot landed .25 inches to right of my previous shot (before I raised it 4 MOA). Then for sh**s and giggles, I put it back down 4 MOA, then the next round (after 10 minutes of barrel cooling) landed 4 MOA NORTH of my POA.
I previously had it on a 7-08 rifle, I could not get it to group with anything I tried. Now I have a different scope on it and it shoots pretty decent.
It sucks having a scope go bad, there is no way to know except spend the money on ammo and your time and frustration...