rockstarr
Major Deplorable
When installing the aftermarket trigger spring be sure the longer spring tab leans toward the trigger not the housing wall. It can be put in leaning toward the wall and will hang up on the trigger reset.
Sage advice
CZ scorpion EVO 3 S1
- Thread starter rockstarr
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
Sage advice
H-Bar
4th MD Regiment Militia
- Jun 29, 2017
- 50
Geisselle really needs to make a trigger for them. it didn't take him long to come up with a solution for the Tavor.
rockstarr
Major Deplorable
Any one running an rmr like a vortex venom or something of the sort on one of these? Thought about one, figure it would be really easy to pick up the dot on and easy on the eyes.
Russ D
Ultimate Member
Holosun 510c is the perfect optic for mine.
boss281
Ultimate Member
Some upgrades
I'm going to use my Scorpion pistol in a competition shoot later in the month, so I thought I'd change out some parts that bothered me.
The HBI Theta extended charging handle went in quickly, as did the HBI Prostock Mag Release Lever. The mini AK fire selector on the right side was gravy too.
I've yet to get around to disassembling the trigger pack for curiosity's sake, but I bought a Delta trigger and reduced weight trigger spring kit so I'll have that opportunity. After watching HBI's video it should be easy as well, but I'll do that when I get time later in the week, then test it all at the range Sunday morning.
While a CZ pistol fan, I wasn't sure if the Scorpion pistol (SB braced) would be much fun but it's an easy range gun. We'll see how well it does in the PCC division in a few weeks...
I'm going to use my Scorpion pistol in a competition shoot later in the month, so I thought I'd change out some parts that bothered me.
The HBI Theta extended charging handle went in quickly, as did the HBI Prostock Mag Release Lever. The mini AK fire selector on the right side was gravy too.
I've yet to get around to disassembling the trigger pack for curiosity's sake, but I bought a Delta trigger and reduced weight trigger spring kit so I'll have that opportunity. After watching HBI's video it should be easy as well, but I'll do that when I get time later in the week, then test it all at the range Sunday morning.
While a CZ pistol fan, I wasn't sure if the Scorpion pistol (SB braced) would be much fun but it's an easy range gun. We'll see how well it does in the PCC division in a few weeks...
Attachments
rockstarr
Major Deplorable
These are tons of fun. That trigger spring kit makes the trigger much more palatable.
The set up you have there is a great start.
My only regret is that I bought the rifle instead of the pistol. Almost impossible to sbr the rifle. Should have just ran a braced pistol and said the hell with the crown.
The set up you have there is a great start.
My only regret is that I bought the rifle instead of the pistol. Almost impossible to sbr the rifle. Should have just ran a braced pistol and said the hell with the crown.
jimbobborg
Oddball caliber fan
I picked up a grey one Friday. I want the PDW brace, and a better trigger. I have a spare Vortex Venom looking for a new home, looks like it has one now.
Sirex
Powered by natural gas
I need to find a better safety
boss281
Ultimate Member
Do you mean the right safety because it digs into your thumb?
I went with the HB Industries mini-AK safety. Not only does it get rid of that problem but also makes it easy to manipulate with my right dominant hand...
Attachments
rockstarr
Major Deplorable
I did the safety delete on the right hand side, but the safety is tough to manipulate in general.
boss281
Ultimate Member
actually the one I point out above makes it easy to use from the right-hand! I'm going to go ahead and buy the left-hand one just so I have a match set.
Sent from my XT1254 using Tapatalk
Sirex
Powered by natural gas
Yes, I don't care for the thumb grinder. Thanks for the insight
jimbobborg
Oddball caliber fan
There was a sale on the PDW brace and mags package online so I ordered it on Monday, and got it today.
And I found out that you can swap out the handguard and barrel for the shorter micro version, so I'll be getting them next month, along with the trigger pack upgrade. In all, I will have as much into this as it would cost for a new Micro.
And I found out that you can swap out the handguard and barrel for the shorter micro version, so I'll be getting them next month, along with the trigger pack upgrade. In all, I will have as much into this as it would cost for a new Micro.
Attachments
Last edited:
boss281
Ultimate Member
My Scorpion pistol is a hoot but I picked up a carbine today for sanctioned action shooting matches. I'm not even going to bother shooting it until I upgrade the charging handle, magazine release and right side safety. Oddly, the trigger on the rifle feels much smoother and less effort than the crunchy original on the pistol, so time will tell if a trigger and spring are necessary. Wish someone made a decent drop in trigger group...
Attachments
Ammo Jon
Ultimate Member
- Mar 3, 2008
- 20,986
boss281
Ultimate Member
Well, I finally got my replacement pistol from CZ. Defect in the mount for the hand grip. Jeez.
Anyhow, Reddings in Gettysburg, my go to for magazines, didn't have Scorpion mags. Anyone have a go to place in southern PA or perhaps Leesburg that carries them in stock?
Anyhow, Reddings in Gettysburg, my go to for magazines, didn't have Scorpion mags. Anyone have a go to place in southern PA or perhaps Leesburg that carries them in stock?
Attachments
boss281
Ultimate Member
Oh come on John. You know those 10 rounders are hard to find...
Sent from my Pixel 3a using Tapatalk
PALYDIN11
Member
Nice pistol. Hopefully I can pick one up later this year.
Users who are viewing this thread
Latest posts
-
-
-
-
-
-
-
Clearance Liqui Moly Motorbike 4T SAE 15W-50 Street | Full Synthetic Motor Oil | 4 Liter (5 Viewers)- Latest: mpollan1
Forum statistics
Latest threads
-
Clearance Liqui Moly Motorbike 4T SAE 15W-50 Street | Full Synthetic Motor Oil | 4 Liter (5 Viewers)
- Started by mpollan1
- Replies: 0
-
-
-
-
-
-