M&M Firearms M16 Cut Lower. Heard of em?

SkiPatrolDude · Sep 3, 2020

Link to them on GunBroker for description purposes.

https://www.gunbroker.com/item/878114270

Tyler Firearms has a bunch of them currently and I picked one up yesterday and sent two buddies in as well. Thanks again to the fine folks over there...

Fit and finish seems excellent and has a true m16 cut (without third hole).

I tried finding info on M&M but there doesn't seem to be much. They're out of Valrico FL and seems to be a small operation that does a fair amount of business on GB.

Anyone have experience with M&M products?

rmbstyle · Sep 3, 2020

Good lowers from what I can tell. I have a few and built one as an SBR. Everything fitted together just fine. BCI Defense used to make M16 pocket no-logo lowers for them, but then BCI Defense stopped manufacturing lowers for the civilian market. My guess is they just decided to make their own instead.

teratos · Sep 3, 2020

You can hog out the pocket on 80%'s......

DutchV · Sep 3, 2020

Sons of Liberty mills their lowers that way.

Alphabrew · Sep 3, 2020

DutchV said:
Sons of Liberty mills their lowers that way.

^^ came to post this. SOLGW lowers are awesome

Alphabrew · Sep 3, 2020

SkiPatrolDude said:
Link to them on GunBroker for description purposes.

https://www.gunbroker.com/item/878114270

Tyler Firearms has a bunch of them currently and I picked one up yesterday and sent two buddies in as well. Thanks again to the fine folks over there...

Fit and finish seems excellent and has a true m16 cut (without third hole).

I tried finding info on M&M but there doesn't seem to be much. They're out of Valrico FL and seems to be a small operation that does a fair amount of business on GB.

Anyone have experience with M&M products?

Dang I might order one of those! That’s not a bad deal at all

SkiPatrolDude · Sep 3, 2020

Thanks for the info. Would have loved a SOLGW lower.

Right now it’s sorta “take what you can get”, but I was happy to have an opportunity to get one of these.

I’m helping a few friends build their first rifles and good parts have been hard to come by.

Jed195 · Sep 3, 2020

Don't flame me for this question...whats got you guys hot on these lowers? M16 inside minus the 3rd hole, availability, price, no name. What is it?

hosspower · Sep 3, 2020

Looks nice! I particularly like there are no BS logos on it.

SkiPatrolDude · Sep 3, 2020

Jed195 said:
Don't flame me for this question...whats got you guys hot on these lowers? M16 inside minus the 3rd hole, availability, price, no name. What is it?

I was merely looking for lowers on behalf of a few friends, but an m16 cut is a nice to have, IMO. It’s rare-ish, for one, and it’s just closer to “the real thing”.

Obviously there is no intention to drill the third hole to insert an M16 FCG.

Same reasoning many prefer the “low shelf” lowers over a “high shelf”. This just takes it to the next level.

Jed195 · Sep 3, 2020

SkiPatrolDude said:
I was merely looking for lowers on behalf of a few friends, but an m16 cut is a nice to have, IMO. It’s rare-ish, for one, and it’s just closer to “the real thing”.

Obviously there is no intention to drill the third hole to insert an M16 FCG.

Same reasoning many prefer the “low shelf” lowers over a “high shelf”. This just takes it to the next level.

Thanks. Makes sense.

DutchV · Sep 3, 2020

JSE Surplus has lowers in stock. They're advertised as Mega so they should be solid.

http://www.jsesurplus.com/JSEForgedAR15Lower-MFGBYMEGAARMS.aspx

mranaya · Sep 3, 2020

Just visited Tyler and snagged an M&M. Thanks for the heads up!

Alphabrew · Sep 3, 2020

mranaya said:
Just visited Tyler and snagged an M&M. Thanks for the heads up!

How much are they?

Alphabrew · Sep 3, 2020

teratos said:
You can hog out the pocket on 80%'s......

How? I don’t think there’s any jigs that accommodate the full M16 pocket. I’d love to be wrong about that.

Applehd · Sep 3, 2020

Hmm... guess I'm hobbling over to Tyler's tomorrow...

teratos · Sep 3, 2020

Alphabrew said:
How? I don’t think there’s any jigs that accommodate the full M16 pocket. I’d love to be wrong about that.

If you look at it, it’s not hard to figure out. The pocket doesn’t have to be any particular dimension. There just needs to be room for the auto parts or RDIAS.

Alphabrew · Sep 4, 2020

I just ordered one from the gunbroker link posted in the OP.

I really like the full pocket lowers, can’t wait until SOLGW has them back in stock.

Alphabrew · Sep 23, 2020

Good find on these, OP :thumbsup:

Applehd · Sep 23, 2020

Picked mine up last Friday... to become an M16 clone. Those who noticed the "AUTO" giggled like a schoolgirl...

M&M Firearms M16 Cut Lower. Heard of em?

The #1 community for Gun Owners of the Northeast

Member Benefits:

Ultimate Member

Member

My hair is amazing

Ultimate Member

Binary male Lesbian

Binary male Lesbian

Ultimate Member

Ultimate Member

Active Member

Ultimate Member

Ultimate Member

Ultimate Member

Task Force Sunny, 2009

Binary male Lesbian

Binary male Lesbian

Throbbing Member

My hair is amazing

Binary male Lesbian

Binary male Lesbian

Throbbing Member

Users who are viewing this thread

Log in

Forum statistics