BenL
John Galt Speaking.
I'm having cycling issues with a 10.5" Noveske 300BLK.
I occasionally get doublefeeds when shooting unsupressed (spent casing doesn't extract, next round rams into it still in the chamber.)
- I've tried every buffer from Pistol to H3; same performance from all. (Noveske recommends H2.)
- The buffer spring is the spring that came with the Phase 5 pistol buffer kit
- Gas key and rings function (tested with an air compressor)
- extractor looks fine
- ejector looks fine
With a single round in the mag, the bolt DOES lock back on the last round.
Does this mean that the gas system is fine and it MUST be either the extractor or ejector?
I occasionally get doublefeeds when shooting unsupressed (spent casing doesn't extract, next round rams into it still in the chamber.)
- I've tried every buffer from Pistol to H3; same performance from all. (Noveske recommends H2.)
- The buffer spring is the spring that came with the Phase 5 pistol buffer kit
- Gas key and rings function (tested with an air compressor)
- extractor looks fine
- ejector looks fine
With a single round in the mag, the bolt DOES lock back on the last round.
Does this mean that the gas system is fine and it MUST be either the extractor or ejector?