View Single Post
Old March 4th, 2019, 05:49 AM #12
John from MD's Avatar
John from MD John from MD is online now
Senior Member
 
Join Date: May 2005
Location: USSR Maryland
Posts: 7,157
John from MD John from MD is online now
Senior Member
John from MD's Avatar
 
Join Date: May 2005
Location: USSR Maryland
Posts: 7,157
Jim,

The problem is probably the inconsistency of the PC on the bullets. I make my own PC bullets and I size them through a Lee push through die. If I don't do this, some bullets will bulge the case, even though they go through a Lee Factory Crimp die on the Dillon 550. This will cause problems in my S&W M&P and my Kahr P9 as the chambers are both tight.

I suggest you get a Lee .356 size die and size them before loading or switch to another brand that might be more consistent.
__________________
John
Vietnam '72 - '73

"A veteran is someone who, at one point in his life, wrote a blank check made payable to the United States of America for an amount of up to and including my life. That is honor, and there are way too many people in this country who no longer understand it."
(credit to a USAF pilot)

For those who gave all.
https://www.youtube.com/watch?v=UUZHTE1jMXg


Proud Patriot Picket
John from MD is online now   Reply With Quote