The Official AR-15 Picture Thread

Vile Shadow · Apr 13, 2014

johnnyb2 said:
Interesting, if I owned a house, I would consider putting this up.

I'd do it, especially if I lived somewhere like Bethesda, just to see the offended, "just bit into a lemon" looks on peoples' faces. :lol2:

Robert1955 · Apr 22, 2014

Ok, hope this is not tiny like the last few. Anyway, here is my AR with the Ergo F93 Pro stock installed. I got to say it's very, very nice and I will put another one on my next build. I have not shot her yet and would like to have it looked over to make sure I did not bugger something up before I take her out for the first time.

armed ferret · Apr 22, 2014

Nice!

I sing the F93's praises frequently. I have two, so far, and plan on a good number more. Any non-clone (MK12, MK18) future builds that I intend to use an adjustable stock will likely wear it.

I'd be happy to give it a once-over if you'd like. I'm not too far up the road from you.

DC-W · Apr 22, 2014

Good deal there. I've heard only good things about those grips.

It's always nice seeing a fellow Aero builder

556ready · Apr 24, 2014

My current 3 functioning ARs. BiPods and scope I built for shooting groundhogs, AimPoint and TLR-1 was put together for work and the multicam AR pistol is just because.

msalvas · Apr 26, 2014

johnnyb2 said:
Interesting, if I owned a house, I would consider putting this up.

That would be a police or sheriff's cruiser in the driveway too haha

Sewer Rat · Apr 27, 2014

msalvas said:
That would be a police or sheriff's cruiser in the driveway too haha

Got to love Florida

armed ferret · Apr 28, 2014

Gas block and tube showed up. Just need the handguard (en route from joebob) and temporary comp (rainier mini which will eventually go on the KISS lightweight build) and she'll be ready for sight-in/load development...

pinned by Armed Ferret, on Flickr

(this is the 20" Lothar-Walther varmint-match barrel...and it's conveniently stamped "HBAR" just in front of the gas block. how thoughtful of them. :innocent0

)

ride4frnt · May 1, 2014

Well, after months of waiting, it's finally done! (Minus optics, which are sitting at the house, and a bipod which isn't necessary for operation)

Jumping for joy when I finally got this rail in my hands this afternoon. Rail is light for 15" and very manageable size, my hands aren't huge. From what I've read, the rail is Rainier branded and manufactured by Seekins (it shows in the way this rail mounts). Details are as follows.

Seekins Precision billet lower
Rainier Arms 15" Force Keymod rail
Rainier Arms RAC comp
18" Black Hole Weaponry barrel
Geissele SSA-E trigger
Rainier Arms raptor
Rainier arms BCG
Stock will be changed to magpul PRS or Luth-AR adjustable stock.

Cmhenderson1313 · May 3, 2014

Grason said:

Hey Grason, gun looks great. I see the pig hiding in there but what kind/length are the rail/barrel? I am building a pistol and love that look. Thanks

ObsceneJesster · May 3, 2014

ride4frnt said:

Read the Terms of Service.

No porn or obscene images.

Sent from my SM-G900T using Tapatalk

DC-W · May 4, 2014

ObsceneJesster said:
Read the Terms of Service.

No porn or obscene images.

Sent from my SM-G900T using Tapatalk

DUDE. There's children on this board! Put that thing away!

:lol2:

BradMacc82 · May 4, 2014

Just switched out the rail for the BCM KMR.

View attachment 118423

Initial thoughts, Brad likey. :thumbsup:

Sc0tt556 · May 4, 2014

^^^^ that looks mean!

BradMacc82 · May 4, 2014

Thank you.

It's a rather plain build (for me), but it's been good to me so far.

Definitely like the KMR rail so far, it's stupid light and fits the hand beautifully. We'll see how it does when I run a few Surefire 60 round mags thru her.

Panzer Radeo · May 4, 2014

Bushmaster XM15-E2S O.R.C.

Parts:
Daniel Defense Omega Rail
PRI MSTN QC Brake
Magpul MBUS Sights
Magpul BAD Lever
Magpul MS3 Sling
Magpul RVG
Magpul ACS
Magpul Aluminum Trigger Guard
Magpul MOE + Grip
Magpul Gripcore CR123
EoTech XPS2-0 & G23.FTS Magnifier
Ergo Grip Rail Covers
Offset Tactical Light Mount
Ultrafire Cree 501B Light

Sig Sauer 716 Patrol (Yeah it's not an AR15 but it's still an AR)

Parts:
Trijicon TA11J-308G 3.5x35mm ACOG\
LaRue/Harris QD 6-9 HBRMS Bipod
Magpul ACS Stock w/ an Enhanced buttpad
Magpul MIAD Grip
Griffin Armament 7.62 Flash Comp
NDZ Performance Speed Bolt Release (only one I've found to fit the Sig 716)
Ergo Grip Rail Covers
Badger Ordnance Tactical Latch Gen 2

I'll be switching out the ACS stock on the bushmaster for a lighter stock. I'll also be getting a Geissele SSA-E for each in the next couple months.

rouchna · May 4, 2014

BradMacc82 said:
Just switched out the rail for the BCM KMR.

View attachment 118423

Initial thoughts, Brad likey.

That looks great Brad! That KMR was nowhere to be found when I was looking. Ended up with the MI SSK.

BradMacc82 · May 4, 2014

rouchna said:
That looks great Brad! That KMR was nowhere to be found when I was looking. Ended up with the MI SSK.

I picked up a few of them when they first hit, glad I did now.

Still got to get armed ferret his KMR, don't need the temptation.

armed ferret · May 4, 2014

4-5 weeks good sir. then my friendly uncle chuckles will pay me to go away.

BradMacc82 · May 4, 2014

View attachment 118427

Kinda disappointed I couldn't fit the KMR on the Beowulf, even after I reduced the size of the gas-block significantly, it was just too big to fit in there.

(Giggity.)

ETA: ferret, no rush boss. your rail is safe and secure - even in the original packaging too.

The Official AR-15 Picture Thread

The #1 community for Gun Owners of the Northeast

Member Benefits:

...

Ultimate Member

Banned

Ultimate Member

Active Member

Active Member

Ultimate Member

Banned

Active Member

Member

Ultimate Member

Ultimate Member

Ultimate Member

Freedom...."Earn this"

Ultimate Member

National Wanderer

Defund the ATF

Ultimate Member

Banned

Ultimate Member

Users who are viewing this thread

Log in

Forum statistics