MD Handgun Lock Exchange - Page 5

Gambler · March 5th, 2012, 10:04 AM

I have an unopened 9mm lock I'd trade for a 45 lock.

OldSchool1959 · March 5th, 2012, 06:25 PM

I have a .45 bore lock. Bought once, dropped once, never used.

hodgepodge · March 5th, 2012, 06:31 PM

Quote:

Originally Posted by P-12 Norm

I have had the law read to me, and also read it myself. I find the way it is worded is that a lock MUST BE SOLD with each handgun purchase. There are some FFL's who do bend the rules a tad, and I believe the MDSP look the other way mostly, but I trust them only so far. ALL FLL's in MD are under a microscope, as we are NOT a 2A Friendly state this could come back to bite a shop right square in the tush. Just my $.02.

SB211 from 2000 says:
A DEALER MAY NOT SELL, OFFER FOR SALE, RENT, OR TRANSFER IN THE
9 STATE ANY HANDGUN MANUFACTURED ON OR BEFORE DECEMBER 31, 2002 UNLESS
10 THE HANDGUN IS SOLD, OFFERED FOR SALE, RENTED, OR TRANSFERRED WITH AN
11 EXTERNAL SAFETY LOCK

The gun must be sold, rented or transferred with an external safety lock.
The law does NOT say that the lock must be sold with the gun.

matt.ruszala · March 5th, 2012, 06:54 PM

I think Ralphy would leave some gray matter behind and won't have to lie about it!!1 LOL

Quote:

Originally Posted by Crab Bait

So Ralphie won't shoot his eye out.

matt.ruszala · March 5th, 2012, 07:02 PM

Folks. This is a sad STATE of affairs we have here. What A-holes we have making laws in this state. If they could see this thread and realize how stupid it makes them look. GEE-MA-NEE-CRICKET. I wish all the idiots who make these laws would just disappear. Maybe I'll wake up one day and realize this is just all a bad dream.

By the way I'm in North East Baltimore. PM me. I have a 9 mm bore and a .40 cal bore lock. XDM 40, 92FS. I'll lend them out to who ever wants. Shoot! Maybe we can go gun shopping and you can give back to me when I get in my car.

TapRackBang · March 5th, 2012, 10:09 PM

Quote:

Originally Posted by matt.ruszala

Folks. This is a sad STATE of affairs we have here. What A-holes we have making laws in this state. If they could see this thread and realize how stupid it makes them look. GEE-MA-NEE-CRICKET. I wish all the idiots who make these laws would just disappear. Maybe I'll wake up one day and realize this is just all a bad dream.

If the liberty-challenged in-duh-viduals who came up with these laws read this thread, they would declare the machinations we have to go through as a victory. Their desire is to do anything they can to cause delay and expense when we try to exercise this particular enumerated Right. Their irrational fear of a tool allows them to rationalize irrational laws.

Jackson923 · March 6th, 2012, 06:37 AM

I have one in .45ACP located in Northern Harford Co. if someone needs to borrow it. I purchased a Rifle at Freedom Armory in Shrewsberry PA, gentleman said he needed to give me a lock for it but if I wanted to I could donate it back for the next guy who purchases a rifle, so that's what I did and that would be great if it was done everywhere that way but I understand rules are rules and some aren't worth tarnishing your FFL over.

Just loaned my .45 lock to Scrovak 3/7/12. See this thread is working already. I'll let ya know when he gives it back.

matt.ruszala · March 6th, 2012, 05:44 PM

Unbelievable. Imagine living with one of those idiots. I'd have to hang myself so the idiorts can't blame guns.

Quote:

Originally Posted by TapRackBang

If the liberty-challenged in-duh-viduals who came up with these laws read this thread, they would declare the machinations we have to go through as a victory. Their desire is to do anything they can to cause delay and expense when we try to exercise this particular enumerated Right. Their irrational fear of a tool allows them to rationalize irrational laws.

Nats Fan · March 7th, 2012, 05:40 PM

Picking up new Sig 1911 on Monday.

Need a .45 bore lock for trade ( I have a 9mm) or borrow.

Ellicott City

Thanks

OldSchool1959 · March 7th, 2012, 05:50 PM

Quote:

Originally Posted by Nats Fan

Picking up new Sig 1911 on Monday.

Need a .45 bore lock for trade ( I have a 9mm) or borrow.

Ellicott City

Thanks

Just PM'd you.

Nats Fan · March 8th, 2012, 03:54 PM

Never got the PM with some internet issues.

My apologies but still in need of the lock

Thanks

CGrant726 · March 8th, 2012, 04:02 PM

Just bought a glock 21 gen4. Northern AA county if anyone needs a .45 lock.

OldSchool1959 · March 8th, 2012, 06:17 PM

Quote:

Originally Posted by Nats Fan

Never got the PM with some internet issues.

My apologies but still in need of the lock

Thanks

Well, I read your PM before I read this thread. It's still available. Will send my contact info again via PM.

brianong18 · March 8th, 2012, 06:22 PM

Anyone with a 9mm lock I can borrow?

FrankOceanXray · March 8th, 2012, 07:40 PM

look here........

Quote:

Originally Posted by Nats Fan

Picking up new Sig 1911 on Monday.

Need a .45 bore lock for trade ( I have a 9mm) or borrow.

Ellicott City

Thanks

TapRackBang · March 8th, 2012, 11:13 PM

And now courtesy of Streetgang's generosity, I have an approved .22 internal lock to loan.
It should work for any .22 - short, long, LR, Win mag - with a barrel length up to about 6".
(If you have to actually install it before walking out the door...

)

Now I'm just waiting for the SR22 to be Marylandistan-approved.

jac43k · March 11th, 2012, 05:22 AM

Quote:

Originally Posted by brianong18

Anyone with a 9mm lock I can borrow?

Do you still need a lock?

krztov · March 11th, 2012, 08:06 AM

I have a 9mm in silver spring if anyone needs it, I'll add to my sig too

brianong18 · March 11th, 2012, 05:04 PM

Quote:

Originally Posted by jac43k

Do you still need a lock?

Yes please.

LAW683 · March 11th, 2012, 11:47 PM

Have a 22LR and 380 here. PMs best way to reach

March 5th, 2012, 10:04 AM	#81
Gambler ¿Got Freedom? Join Date: Oct 2011 Location: Parkville Posts: 1,098	I have an unopened 9mm lock I'd trade for a 45 lock. __________________ MSI Executive Member - Join Us, and stand up for your rights! SAF Life Member NRA Member FreeState Gun Range Member

March 5th, 2012, 06:25 PM	#82
OldSchool1959 Member Join Date: Feb 2012 Location: Anne Arundel County Posts: 416	I have a .45 bore lock. Bought once, dropped once, never used. __________________ _____________________________________ Pennsylvania resident by September 30th or bust. MSI Member, NRA Member, Maryland Collector, Utah CFP Holder, Reloader, Democrat Primary VOTER.

March 5th, 2012, 07:02 PM	#85
matt.ruszala Member Join Date: Jan 2012 Location: NorthEast Baltimore City Posts: 333	Folks. This is a sad STATE of affairs we have here. What A-holes we have making laws in this state. If they could see this thread and realize how stupid it makes them look. GEE-MA-NEE-CRICKET. I wish all the idiots who make these laws would just disappear. Maybe I'll wake up one day and realize this is just all a bad dream. By the way I'm in North East Baltimore. PM me. I have a 9 mm bore and a .40 cal bore lock. XDM 40, 92FS. I'll lend them out to who ever wants. Shoot! Maybe we can go gun shopping and you can give back to me when I get in my car. __________________ My wife keeps me for the entertainment value http://www.nssf.org/gunvote NRA MSI

March 6th, 2012, 06:37 AM	#87
Jackson923 Hell Yeah! Join Date: Jan 2008 Location: Harford Co Posts: 1,732	I have one in .45ACP located in Northern Harford Co. if someone needs to borrow it. I purchased a Rifle at Freedom Armory in Shrewsberry PA, gentleman said he needed to give me a lock for it but if I wanted to I could donate it back for the next guy who purchases a rifle, so that's what I did and that would be great if it was done everywhere that way but I understand rules are rules and some aren't worth tarnishing your FFL over. Just loaned my .45 lock to Scrovak 3/7/12. See this thread is working already. I'll let ya know when he gives it back. __________________ "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." - George Washington "The two most important rules in a gunfight are: always cheat and always win." - Clint Smith Last edited by Jackson923; March 8th, 2012 at 04:33 PM.

March 7th, 2012, 05:40 PM	#89
Nats Fan Junior Member Join Date: Feb 2009 Posts: 28	.45 Bore lock Picking up new Sig 1911 on Monday. Need a .45 bore lock for trade ( I have a 9mm) or borrow. Ellicott City Thanks

March 8th, 2012, 03:54 PM	#91
Nats Fan Junior Member Join Date: Feb 2009 Posts: 28	Never got the PM with some internet issues. My apologies but still in need of the lock Thanks

March 8th, 2012, 04:02 PM	#92
CGrant726 Member Join Date: Feb 2009 Location: Pasadena Posts: 113	Just bought a glock 21 gen4. Northern AA county if anyone needs a .45 lock.

March 8th, 2012, 06:22 PM	#94
brianong18 Nobody Join Date: Jul 2011 Location: Pasadena, MD Posts: 500	Anyone with a 9mm lock I can borrow?

March 8th, 2012, 11:13 PM	#96
TapRackBang I know what I'm doing. Join Date: Jan 2012 Location: Bel Air Posts: 523 Images: 7	And now courtesy of Streetgang's generosity, I have an approved .22 internal lock to loan. It should work for any .22 - short, long, LR, Win mag - with a barrel length up to about 6". (If you have to actually install it before walking out the door... ) Now I'm just waiting for the SR22 to be Marylandistan-approved. __________________ Support the Second Amendment Foundation when buying from Amazon ==> http://saf.org/amazon *NRA (Lifer) - SAF (Lifer) - MSI - NMA - EFF - FSF <-- all of these .orgs fight for your rights.* Federal Curio & Relic Licensee - Maryland Designated Collector Need an approved .40 S&W or .22 internal lock? Borrow mine! Find others or list yours here. (Thread here.)

March 11th, 2012, 08:06 AM	#98
krztov Member Join Date: Jan 2012 Location: Silver Spring Posts: 442	I have a 9mm in silver spring if anyone needs it, I'll add to my sig too

March 11th, 2012, 11:47 PM	#100
LAW683 Junior Member Join Date: Nov 2011 Posts: 63	Have a 22LR and 380 here. PMs best way to reach

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode